Inspection Services

Aerospace Industry

Our aerospace division is an approved maintenance organization by Transport Canada certified as AMO  #25-10 (specialized work in non-destructive testing), as well as EASA (part 145 approval 145.7311) and FAA (under 14CFR 43.17).  We are also registered under Controlled Goods Program in Canada. Our services are offered on-site, wherever you are, or at our Laval or Quebec city offices.

Services :

  • Advanced and conventional non-destructive testing (all methods)
  • NDT consulting services

Some Specific and Authorized Inspections :

  • ROLLS ROYCE Service Bulletin RB211-72 AH-465 “Engine Phased-Array UT Inspection of Trent 700 Fan Blades”
  • AIRBUS “Eddy current inspection to detect cracks in electrically conductive material” (AITM6-003)
  • AIRBUS A318/A319/A320/A321 : Inspection of Upper Wing Skin between Trailing Edge and the Forward Fastener Row of the Rear and False Rear Spar, using a Phased-Array Wheel Probe (57-29-07)
  • AIRBUS A310 : “Inspection of Wings Top Skin Panel 1 and 2 at Rib 2, using Phased-Array specific accessories” (57-29-01)
  • BOEING : “Fuselage skin – Internal cracks at the edges of chem-mill doublers with the wide area phased-array probe” (737 NTM Part 4, 53-30-12)
  • BOEING : “Fuselage skin – Internal cracks at doubler edges with phased-array” (737 NTM Part 4, 53-30-07
  • BOEING : Fuselage Skin Scribe Mark Crack Inspection using Phased-Array ultrasonic testing
  • TELEDYNE Continental Motors : Ultrasonic crankshafts inspection (Procedure MHS-200)
  • VICKING : Bird cage inspection (SB 2/49)
  • AIRBUS / BOEING : Thermography inspections (routine and non-routine in accordance with manufacturer procedures)

Inspection Techniques :

  • Eddy Current Testing (ECT)
  • Eddy Current Array (ECA)
  • Conventional Radiography (RT)
  • Computerized Radiography (CR)
  • Conventional Ultrasonic Testing (UT)
  • Phased-Array Ultrasonic Testing (PAUT)
  • Magnetic Particle Inspection (MPI)
  • Liquid Penetrant Inspection (LPI)
  • Thermography
  • 3D Laser Scanning (VT3D)

Personnel Certifications :

  • CGSB 48.9712/ISO 9712 (ECT, UT, MT, PT, RT)
  • NAS 410 (ET, UT, MT, PT, RT, IRT)
  • ITC (thermography)